- Castable or dry ramming mix monolithic solutions
- ABT (Advanced Block Technology) pre-formed solutions
- Installation by Turbomix / Turbopump / Vibrosystem
- Installation and start-up services
- After-sale technical assistance
Solutions
Technical data
| Area | Al2O3 % |
SiO2 % |
SiC % |
Cr2O3 % |
GM* mm |
Density Kg/dm3 |
λ 500°C** W/m°K | λ 1000°C** W/m°K | T. Max °C |
| Cover / uppercase insulating lining | |||||||||
| ISOLINETM MICROPOR SF 1100 | 50,0 | 45,0 | ZrSiO2 | 0,31 | 0,04 | 0,06 | 1.100 | ||
| ISOLINETM LOCKSIL ECO | 25,3 | 66,0 | 1,00 | 0,25 | 1.000 | ||||
| PATCH-LITETM 210 | 33,3 | 55,9 | 4,0 | 0,80 | 0,10 | 0,12 | 1.200 | ||
| PATCH-LITETM 255 | 39,4 | 52,7 | 2,5 | 0,70 | 0,12 | 0,14 | 1.300 | ||
| ISOLINETM K 23 | 39,0 | 57,0 | 0,60 | 0,23 | 0,29 | 1.300 | |||
| Uppercase safety lining | |||||||||
| LITE-BLOCKTM 310 | 97,9 | 0,1 | 6,0 | 1,10 | 0,21 | 0,26 | 1.550 | ||
| CAST-LITETM X 980 (ABT) | 97,5 | 0,0 | 6,0 | 1,26 | 0,20 | 0,26 | 1.600 | ||
| PATCH-LITETM 94 | 92,6 | 0,1 | 4,0 | 1,10 | 0,18 | 0,23 | 1.580 | ||
| ISOLINETM SIL 3 | 56,0 | 42,5 | 0,95 | 0,30 | 0,41 | 1.450 | |||
| FIRELINE® AD 7.3 | 42,0 | 2,12 | 1,45 | 1,58 | 1.410 | ||||
| Uppercase hot face lining | |||||||||
| ULTRABLOCK® 78 (ABT) | 76,6 | 17,8 | 4,6 | 5,0 | 2,90 | 1,48 | 1,41 | 1.760 | |
| ULTRABLOCK® 119 (ABT) | 83,5 | 15,6 | 5,0 | 2,87 | 2,04 | 2,16 | 1.760 | ||
| DYSTONE® 880 | 93,0 | 6,1 | 40,0 | 3,10 | 3,37 | 3,20 | 1.760 | ||
| DYSTONE® 865 | 86,0 | 12,3 | 55,0 | 2,89 | 3,20 | 3,08 | 1.705 | ||
| FLUSTONE® 800 | 81,2 | 17,0 | 6,0 | 2,89 | 2,04 | 2,16 | 1.760 | ||
| FLUSTONE® V 810 | 82,7 | 15,3 | 7,0 | 2,86 | 2,04 | 2,16 | 1.750 | ||
| FLUSTONE® 700 | 71,3 | 27,0 | 6,0 | 2,66 | 1,93 | 2,11 | 1.705 | ||
| Cover hot face lining | |||||||||
| FLUSTONE® V 570 | 57,8 | 39,3 | 6,0 | 2,55 | 1,22 | 1,22 | 1.650 | ||
| FLUSTONE® 700 | 71,3 | 27,0 | 6,0 | 2,66 | 1,93 | 2,11 | 1.705 | ||
| Inductor insulating lining | |||||||||
| ISOLINETM MICROPOR SF 1100 | 50,0 | 45,0 | ZrSiO2 | 0,31 | 0,04 | 0,06 | 1.100 | ||
| ISOLINETM LOCKSIL ECO | 25,3 | 66,0 | 1,00 | 0,25 | 1.000 | ||||
| Inductor hot face and capping lining | |||||||||
| DRISTONE® 88 MG | 24,1 | 3,7 | 71,3 | MgO | 5,0 | 2,90 | 1,63 | 1,86 | 1.785 |
| DRISTONE® 972 | 97,5 | 0,5 | 5,0 | 3,05 | 1,74 | 2,17 | 1.680 | ||
| PATCHSTONETM 84 MG | 9,2 | 1,1 | 84,9 | MgO | 4,0 | 2,70 | 1,98 | 2,15 | 1.750 |
| PATCHSTONETM 943 | 94,3 | 0,2 | 4,0 | 3,05 | 3,26 | 3,61 | 1.800 | ||
| ECO WASH 99 | 98,5 | 0,1 | 4,00 | 1.850 | |||||
| Maintenance | |||||||||
| PLAST SETTM PS 98 | 97,5 | 0,2 | 0,1 | 1.750 | |||||
| PLAST SETTM PS 96 | 85,1 | 0,2 | 9,4 | 0,1 | 1.760 | ||||
| RAMSTONETM C 76 | 74,3 | 21,5 | 3,0 | 2,75 | 2,67 | 2,44 | 1.650 | ||
| RAMSTONETM C 879 | 87,4 | 11,0 | 5,0 | 2,85 | 2,21 | 2,15 | 1.705 | ||
| RAMSTONETM C 104 | 91,8 | 1,5 | 5,0 | 4,0 | 3,00 | 3,26 | 3,14 | 1.780 | |
| RAMSTONETM R 105 | 91,8 | 1,5 | 5,0 | 2,0 | 3,05 | 3,26 | 3,14 | 1.780 | |
GM* - GM-Max. grain-size ** λ - Thermal conductivity
The above information is for general purposes only, not for specific application and not to be considered as warranty. Please contact us for detailed instructions.
